Ntp-B228 View E10/100-4 Ethernet Maintenance Information; Dlp-B309 View Ethernet Mac Address Table - Cisco ONS 15327 Procedure Manual

NTP-B228 View E10/100-4 Ethernet Maintenance Information

NTP-B228 View E10/100-4 Ethernet Maintenance Information
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2 To view Ethernet spanning tree parameters, click the Maintenance > Ether Bridge > Spanning Trees
tabs. The current spanning tree information is displayed.
As needed, complete the following tasks:
Step 3
•
•
Stop. You have completed this procedure.

DLP-B309 View Ethernet MAC Address Table

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, click the Maintenance > Ether Bridge > MAC Table tabs.
Select the appropriate E10/100-4 Ethernet card in the Layer 2 Domain field.
Step 2
Click the Retrieve button.
Step 3
The MAC address table information is displayed.
Return to your originating procedure (NTP).
Step 4
Cisco ONS 15327 Procedure Guide, R4.0
14-26
"DLP-B 60 Log into CTC" task on page 2-23
DLP-B309 View Ethernet MAC Address Table, page 14-26
DLP-B310 View Ethernet Trunk Utilization, page 14-27
This procedure enables viewing the maintenance information on a
selected E10/100-4 Ethernet card.
None
Before you view PM values, be sure you have created the appropriate
circuits and provisioned the card according to your specifications. For
more information, see Chapter 5, "Create Circuits and VT Tunnels"
Chapter 10, "Change Port Settings."
As needed
Onsite or remote
Retrieve or higher
This task displays the Ethernet MAC address table for any node with one
or more E10/100-4 Ethernet cards installed.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
Chapter 14
at the node that you want to monitor.
Maintain the Node
and
March 2003