Ntp-B205 Modify Users And Change Security; Dlp-B271 Change Node Security Policy - Single Node - Cisco ONS 15327 Procedure Manual

Hide thumbs Also See for ONS 15327:
Table of Contents

Advertisement

Chapter 9
Change Node Settings

NTP-B205 Modify Users and Change Security

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Complete the
Step 2
Perform any of the following tasks as needed:
Step 3
Step 4
Complete the
Stop. You have completed this procedure.

DLP-B271 Change Node Security Policy - Single Node

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1
In node view, click the Provisioning > Security > Policy tabs.
Under Idle User Timeout, you can modify the timeout times by clicking the hour (H) and minute (M)
Step 2
arrows. You can choose values between 0 and 16 hours, and 0 and 59 minutes.
Under User Lockout, you can modify the following:
Step 3
March 2003
Use this procedure to modify user and security properties for the ONS
15327.
None
NTP-B30 Create Users and Assign Security, page 3-3
As needed
Onsite or remote
Superuser
"DLP-B60 Log into CTC" task on page
"NTP-B108 Back Up the Database" procedure on page
"NTP-B108 Back Up the Database" procedure on page
This task changes the security policy for a single node, including idle user
timeouts, user lockouts, password changes, and concurrent login policies.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Superuser
Failed Logins Before Lockout-The number of failed login attempts a user can make before the user
is locked out from the node. You can choose a value between 0 and 10.
NTP-B205 Modify Users and Change Security
2-23. If you are already logged in, continue with
14-6.
14-6.
Cisco ONS 15327 Procedure Guide, R4.0
9-17

Advertisement

Table of Contents
loading

Table of Contents