Dlp-B268 Apply A Custom Network View Background Map - Cisco ONS 15327 Procedure Manual

Chapter 9 Change Node Settings
On the Preferences dialog box, click the Map tab, then check the Use Default Map check box if it is not
Step 3
already checked.
Click the Default Maps field and choose a default map from the pull-down menu. Map choices are:
Step 4
Germany, Japan, Netherlands, South Korea, United Kingdom, and the United States (default).
Click Apply. The new network map is displayed.
Step 5
Click OK.
Step 6
If the ONS 15327 icons are not visible, right-click the network view and choose Zoom Out. Repeat until
Step 7
all the ONS 15327 icons are visible.
If you need to reposition the node icons, drag and drop them one at a time to a new location on the map.
Step 8
If you want to change the magnification of the icons, right-click the network view and choose Zoom In.
Step 9
Repeat until the ONS 15327 icons are displayed at the magnification you want.
Return to your originating procedure (NTP).
Step 10

DLP-B268 Apply a Custom Network View Background Map

Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
Note You can replace the network view background image with any JPEG or GIF image that is accessible on
a local or network drive. If you apply a custom background image, the change is stored in your CTC user
profile on the local computer. The change does not affect other CTC users on different computers.
Step 1 From the View menu choose Go to Network View.
Step 2 Right-click the network or domain map and choose Set Background Image.
Click Browse. Navigate to the graphic file you want to use as a background.
Step 3
Select the file. Click Open.
Step 4
Click Apply and then click OK.
Step 5
If the ONS 15327 icons are not visible, right-click the network view and choose Zoom Out. Repeat this
Step 6
step until all the ONS 15327 icons are visible.
If you need to reposition the node icons, drag and drop them one at a time to a new location on the map.
Step 7
If you want to change the magnification of the icons, right-click the network view and choose Zoom In
Step 8
or Zoom Out. Repeat this step until the ONS 15327 icons are displayed at the magnification you want.
Return to your originating procedure (NTP).
Step 9
March 2003
This task changes the background image or map on the CTC network view.
None
DLP-B60 Log into CTC, page 2-23
As needed
Onsite or remote
Retrieve or higher
NTP-B202 Customize the CTC Network View
Cisco ONS 15327 Procedure Guide, R4.0
9-9