6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
L The screen shows when the Message (16) is set to "enable."
Priority Call �������
14
Example:
Even while B and C are talking on a Group Call from A,
B can make an Individual Call (High) to C.
In this case, the Group Call is canceled.
10
11
12
13
14
15
16
17
18
Select whether or not the IP100H uses Priority Call.
The priority levels of the Call types are in the following order.
Priority
Priority
level
High
Fixed
Selectable *
Low
* Selectable in the Call Type Priority in the [RoIP Server] screen in the
[RoIP Server settings] menu.
L Priority is given to the first call between calls with the same priority level.
L When a call is taken, priority is given to the setting of the caller.
Call type
Telephone
Emergency (High)
Emergency (Normal)
All Call (High)
Individual Call (High)
Group Call (High)
All Call (Normal)
Individual Call (Normal) Disable
Group Call (Normal)
Group Call
A
6-27
(Default: Disable)
Priority
Remarks
Call
For telephone
—
communication
Enable
—
Disable
—
Includes the Area Call
Enable
or using an IP100FS
Includes using an
Enable
IP100FS
Includes the Area Call
Enable
or using an IP100FS
Disable
Includes the Area Call
—
Disable
Includes the Area Call
VE-PG4
Wireless
access point
Individual Call
B
(High)
C