Icom VE-PG4 Operating Manual page 405

15
MANAGEMENT
Management Tools screen
Management > Management Tools
■ Telnet/SSH
Set for accessing the RoIP Gateway using Telnet or SSH.
Telnet ���������
1
Telnet Port �������
2
SSH ����������
3
SSH Authentication Method
4
SSH Port ��������
5
SSH Public Key �����
6
1
2
3
4
5
6
Select whether or not to allow access to the RoIP Gateway using Telnet.
Enter the Telnet Port number.
• Range: 23, or between 1024 and 65535.
• Some the RoIP Gateway's ports cannot access Telnet.
L Enter a different port number different than HTTP, HTTPS, or SSH.
Select whether to allow to access by the SSH protocol. (Default: Enable)
L By using SSH, you can encrypt the contents to be set using the SSH client
program.
L This product supports only the SSH protocol Version 2.
L Prepare an SSH client to use SSH.
Select the SSH Authentication Method to access the RoIP Gateway
when you set SSH Settings to "Enable."
• Password:
• Public Key:
• Automatic:
Enter the Telnet Port number.
• Range: 22, or between 1024 and 65535.
• Some of the RoIP Gateway's ports cannot access SSH.
L Enter a port number that is different from HTTP, Telnet, or HTTPS.
Set the Public Key for accessing.
L Displayed only when the SSH setting is set to "Enable" and SSH
Authentication Method is set to "Public" or "Automatic."
15-7
Authenticating with the password.
Authenticating with the Public Key.
Automatically authenticating with the password or the
Public Key.
(Default: Disable)
(Default: 23)
(Default: Automatic)
(Default: 22)