Table of Contents
Advertisement
6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
L The screen shows when the Message (16) is set to "enable."
Status ���������
17
IP100H sends the Status
Status
At lunch
Status selection screen
VE-PG4 Transceiver Management screen
10
11
12
13
14
15
16
17
18
Select whether or not the IP100H can send Status information.
(Example: At lunch, Meeting, Waiting)
When "Enable" is selected, push the [FUNC] key on the IP100H twice
to enter the Status selection screen.
L Up to 10 statuses of 32 characters or less can be entered on the [Status]
screen in the [Common Settings] menu.
L The status that the IP100H sends can be displayed on the [Transceiver
Management] screen in the [Transceiver Settings] menu or the one-Touch
button of the IP100FS.
VE-PG4
Wireless
access point
IP100H
(TX)
IP100FS One-Touch button
At lunch
Name, Destination ID, Status number
and Status information
Status
6-30
(Default: Disable)
Advertisement
Chapters
Table of Contents
