Icom VE-PG4 Operating Manual page 410

15
MANAGEMENT
Date and Time screen
Management > Date and Time
■ SNTP Server
The SNTP server is for other RoIP devices that have no route to an external Time server (NTP).
L To use this function, an Internet connection and default gateway settings are necessary.
SNTP Server ������
1
<Apply> ��������
2
<Reset> ��������
3
1
Select "Enable" to use the SNTP function.
When you select 'Enable', the RoIP devices function as an NTP server
and set the
internal clock time of the RoIP Gateway.
L This function can be used only for Icom RoIP
route to the external NTP server.
L Set the Date and Time screen before using this function.
Click to apply the entries set on Time Zone, NTP, and SNTP Server.
Click to reset the settings when you change the settings on Time Zone,
NTP, and SNTP Server.
L You cannot reset after clicking <Apply>.
15-12
2 3
(Default: Enable)
devices,
which cannot set the