Icom VE-PG4 Operating Manual page 350

13
PBX EXTEnSIon
Transceiver Controller Telephone Connection screen
PBX Extension > Transceiver Controller Telephone Connection
■ Call Initiation Setting
Sets the details on voice transmission to the SIP phone when there is voice input from the transceiver
controller.
Attack Time ������
1
Release Time ������
2
Voice Delay �������
3
VOX Threshold �����
4
1
2
3
4
Enter the TX attack time in 5 millisecond step. It is the delay time before
the VoX switch turns on after an audio signal is received through the
network.
• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps
Select the RX delay time in 5 millisecond step. It is the delay time for
the VoX switch to turn oFF after no audio signal is received through
the network.
• Range: 5 to 2000 (milliseconds) in 5 millisecond steps
Set the audio signal buffer time to prevent intermittent audio.
• Range: 0 ~ 500 (milliseconds) in 5 millisecond steps
The VoX function automatically switches between receive and transmit
according to this threshold level.
• Range: 0 ~ 100 (%)
L Lower values make the VoX function more sensitive to the audio signal.
13-57
(Default: 1000)
(Default: 200)
(Default: 5)
(Default: 70)