Icom VE-PG4 Operating Manual page 87

6
TRANSCEIvER CoNTRoLLER
Transceiver Management screen
Transceiver Controller > Transceiver Settings > Transceiver Management
■ Transceiver Management
1
L An IP100H is displayed in bold when a setting has been changed and a reboot is required.
Talkgroup ��������
5
Location ��������
6
<Refresh> �������
7
Version ���������
8
Manual Update �����
9
Manual Reboot �����
10
2 3
9
10
Displays the Talkgroup IDs that are selected by the IP100Hs or
IP100FSs.
L When a Talkgroup name is registered, a Talkgroup number (name) is
displayed.
L While a IP100H or IP100FS does not select a Talkgroup, or [Registration
Status] displays "Disconnected," "–" is displayed.
Displays the BSSIDs of the wireless access points that the IP100Hs are
connected to.
L When [Registration Status] displays "Disconnected," "–" is displayed.
Click to reload the Registration Status.
L The connection status of the IP100H or IP100FS, or the activation status
check of when the IP100H or IP100FS reboots are renewed.
Displays the version of the IP100Hs or IP100FSs that are registered to
the RoIP Gateway.
L When [Registration Status] displays "Disconnected," "–" is displayed.
Enable to manually update the IP100H firmware when the RoIP
Gateway sends Manual Reboot (10) to the IP100H.
When the IP100H is ready to update the firmware, "F" blinks on the
Blinks
1/24 16:57
Sales8
display, and then the IP100H automatically reboots and starts the
firmware update.
L When the IP100H has failed to prepare a firmware update, the IP100H
does not automatically reboot. If necessary, send a reboot command to the
IP100H.
Click <Execute> to reboot all of the IP100Hs that are selected in [Check
Box] (1).
6-16
4 5
F
Updating
7
8
6