Icom VE-PG4 Operating Manual page 167

7
CONNECTION PORT SETTINgS
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■ Digital Transceiver Connection
L The above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to Digital
Transceiver 1 (D-TRX1).
L The above screen shows when the Digital Frame Packet (5) and Scrambler (11) are set to "Enable," and Specify
TX CC (10) is checked.
Digital Frame Packet
5
Unit ID
6
Talkgroup ID (Start)
7
Talkgroup ID
8
RX CC
9
Specify TX CC
10
System: dPMR Mode 2
1
2
3
4
5
6
7
8
9
10
11
12
Select whether or not to enable the Packet Encryption function,
according to the UC-FR5000 setting.
When you enable the function, enter an 8 digit Common key.
Enter a unit ID.
• Range: 1 ~ 9999999
Enter a Talkgroup start ID.
• Range: 1 ~ 9999999
Enter a Talkgroup ID.
• Range: 1 ~ 9999999
Enter a CC for receiving.
• Range: 0 ~ 63
Check to separately enter the TX CC.
When checked, enter a TX CC code between 0 and 63.
L Do not duplicate the RX CC.
7-13
(Default: Digital Transceiver (D-TRX1): 201
Digital Transceiver (D-TRX2): 202
Digital Transceiver (D-TRX3): 203
Digital Transceiver (D-TRX4): 204)
(Default: Unchecked)
(Default: Disable)
(Default: 00000000)
(Default: 100000)
(Default: 100000)
(Default: 0)
(Default: 0)