Icom VE-PG4 Operating Manual page 160

7
CONNECTION PORT SETTINgS
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■ Digital Transceiver Connection
L The above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to the Digital
Transceiver 1 (D-TRX1).
L The above screen shows when the Encryption is set to "Enable."
System Code
7
Prefix ID
8
Unit ID
9
Prefix ID
10
Talkgroup ID
11
Encryption
12
Connection Status
13
System: NXDN-Trunking
1
2
3
4
5
6
7
8
9
10
11
12
13
Displays the System Code that is set in the UC-FR5000.
Enter the Prefix ID (for NXDN Trunking) that is set in the UC-FR5000.
• Range: 1 ~ 30
Enter the Unit ID that are set in the UC-FR5000.
• Range: 1 ~ 2000
Enter the Prefix ID (for NXDN Trunking) that is set in the UC-FR5000.
• Range: 1 ~ 30
Enter a Talkgroup ID.
• Range: 1 ~ 2000
Select whether or not to enable the Encryption function. (Default: Disable)
When you enable the function, enter an encryption key between 1 and
32767.
Click to connect or disconnect the transceiver, or to refresh the
connection status.
L The buttons are grayed out when Connected Repeater's Address is blank.
L The settings cannot be changed while connection is established. Click
<Disconnect> before changing the settings on this screen.
7-6
(Default: 1)
(Default: 1)
(Default: 1)
(Default: 1)
(Default: 1)