Icom VE-PG4 Operating Manual page 58

5
BRidgE ConnECtion SEttingS
Bridge Connection screen
Bridge Connection Settings > Bridge Connection
■ Bridge Connection
Unicast mode
L the above example shows when the Bridge Connection destination (2) is set to "Custom Bridge Connection."
Multicast mode
L the above example shows when the Bridge Connection destination (2) is set to "digital transceiver 2 (d-tRX2)."
Destination Address ���
5
1
2
3
4
5
6
7
1
2
3
8
Set the iP address as follows.
L When "Enable" is selected in the SelCall in Bridge Connection (4), this item
is not displayed.
• When the Transmission mode is "Unicast":
Enter a destination Address, or its domain name of up to 63 characters.
• When the Transmission mode is "Multicast":
Enter the same multicast address as the setting in the Bridge Connection
destination.
the settable range: 244.0.0.0 ~ 239.255.255.255
9
5-4
9 10
10
(default: 239.255.255.1)