Icom VE-PG4 Operating Manual page 278

11
PBX
Extension screen
PBX > Extension
■ Extension
Port Type：SIP Phone (Automatic Detection)
Port Type: Converter Bridge
Connection from WAN
9
MAC Address ������
10
Default Call Destination
11
Number ��������
<Apply> ��������
12
<Reset> ��������
13
1
2
3
4
5
6
7
8
9
10
1
11
� Displayed only when the Port Type (1) has set to SIP phone.
Set whether or not to access to the extension from WAN.
L Be sure to set a long and complicated Password (5).
Enter the MAC Address of the Panasonic KX series SIP phone.
The MAC Address is settable only when the Port Type (1) is set to
other than "SIP Phone (Standard)," "SIP Phone (WLAN)," "Transceiver
Controller Telephone Connection," and "Converter Bridge."
Displayed when the Port Type (1) has set to "Converter Bridge."
Enter a destination phone number when the device connected to the
Port Type (1) makes a call.
Click to apply the entries.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
11-10
12 13
12 13