M Static Dhcp; M List Of Static Dhcp Settings - Icom VE-PG4 Operating Manual

3
NETwoRk SETTINgS
DHCP Server screen
Network Settings > DHCP Server
■ Static DHCP
Enter the MAC and static IP addresses of the DHCP server.
L You can enter up to 32 entries.
Static DHCP ��������
■ List of Static DHCP Settings
Displays the static DHCP entries.
<Delete> ���������
Enter the MAC and IP addresses, and then click <Add>.
L This setting is useful when the DHCP Server function is used. See page 3-4
for details of the DHCP Server function.
L Sets a different IP address from the IP address that the DHCP Server
function automatically assigns.
L Make sure that the addresses of the devices on the network do not overlap
or conflict.
If a DHCP server is already connected to the network, and there is an
address conflict, a network problem will occur.
Click to delete the entry.
L You cannot restore after clicking <Delete>.
3-7