Icom VE-PG4 Operating Manual page 84

6
TRANSCEIvER CoNTRoLLER
Area Call screen
Transceiver Controller > RoIP Server Settings > Area Call
■ Access Point Search
2
No. �����������
4
<Add> ���������
5
<Apply selection> ����
6
1
Select an area to register from a "Number" in [Area Setting].
When an area number that is already registered is selected, BSSID is
added to the area number.
L If the area number is already registered in [Area Call], it cannot be selected.
L An area number is selected, depending on the name that is registered
with the same Tenant (Fleet) Number in [IP Advanced Radio System] of an
access point, as shown below.
• When the area number's name is already registered in [Area Setting], the
area number is selected (A blank is also recognized as a part of the name).
• When the area number's name is not registered in [Area Setting], an
unused and initial area number is selected.
Click to register a discovered access point in [Access Point Search].
Click to register a selected access point in [Check Box] (2).
4
3
6-13
5
6