Icom VE-PG4 Operating Manual page 100

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
L The screen shows when the Message (16) is set to "enable."
Message ��������
16
IP100H transmits a message
VE-PG4
Message
All
Gather immedi
Message selection screen
(TX)
IP100FS transmits a message
Selected Call type
10
11
12
13
14
15
16
17
18
Select whether or not the IP100H can send messages.
When "Enable" is selected, push the [FUNC] key on the IP100H once to
enter the Message selection screen.
L Up to 10 messages of 32 characters or less can be programmed on the
[Messages] screen in the [Common Settings] menu.
L Select the message number 1 to 10 in [Default Message] that is registered
on the [Message] screen.
IP100H
Selected or edited message
Wireless
access point
All Call
The IP100FS can store up to 100 messages
in each site.
You can edit the stored messages.
6-29
(Default: Disable)
Blinks Scrolls
1/25 12:57
All Gather imme
Received message screen
(RX)