M Transceiver Special Number - Icom VE-PG4 Operating Manual

11
PBX
Special Number screen
PBX > Special Number
■ Transceiver Special Number
Sets the special numbers that can be used only by the transceivers.
Options: Up to 3 digit numbers and characters (0~9, #, *)
OFF-hook for Dialing ��
1
OFF-hook for Answering �
2
ON-hook ��������
3
Immediate Calling ����
4
1
2
3
4
Set the tone signal starting to dial.
Hold down this key for a while, then push the number keys to call.
L Only when this option is set to a 1 digit number, a transceiver enters off-hook
condition by holding this key for the set period of time in OFF-hook Detect
Timer, then you will be ready to dial.
Also you have to enable the DTMF settings in Connection Port Settings.
Set the tone signal to receive the telephone call on a transceiver.
L Only when this option is set to a 1 digit number, a transceiver can answer
a telephone call by holding this key for the set period of time in OFF-hook
Detect Timer. Also you have to enable the DTMF settings in Connection Port
Settings.
L When no tone signal has set, the call is automatically received.
Set the tone signal to end (disconnect) the call.
Push this key to hook the call on a transceiver.
L Only when this option is set to a 1 digit number, a transceiver can cancel
a telephone call by holding this key for the set period of time in OFF-hook
Detect Timer. Also you have to enable the DTMF settings in Connection Port
Settings.
Set the DTMF code for immediately transmitting the code.
11-6
(Default: Blank)
(Default: #)
(Default: #)
(Default: None)