Icom VE-PG4 Operating Manual page 23

Roip gateway
Hide thumbs Also See for VE-PG4:
Table of Contents

Advertisement

3
NETwoRk SETTINgS
DHCP Server screen
Network Settings > DHCP Server
■ DHCP Server
The screen above shows when "DNS Proxy" (8) is set to "Disable."
TFTP Server Distribution �
13
TFTP Server Address ��
14
<Apply> ��������
15
<Reset> ��������
16
8
9
10
11
12
13
14
Set to "Enable" to use a provisioning kX Series telephone.
when this option is enabled, the telephone automatically reads the
setting from the RoIP gateway and sets up by itself.
L The telephone's MAC address must be entered on the "Extension" screen.
L when using this system with static IP addresses, see also Section 4 in the
Installation guide.
Enter the IP address of the TFTP server for the kX series telephone.
If this item is blank, the RoIP gateway works as theTFTP server.
Click to apply the entries.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
15 16
3-6
(Default: Enable)
(Default: Blank)

Advertisement

Table of Contents
loading

Table of Contents