Icom VE-PG4 Operating Manual page 344

13
PBX EXTEnSIon
Transceiver Controller Telephone Connection screen
PBX Extension > Transceiver Controller Telephone Connection
■ Control
Call Incoming ������
4
Calling ���������
5
Connection Success ���
6
Disconnect �������
7
Connection Failure ���
8
Notice Tone Volume ���
9
1
2
3
4
5
6
7
8
9
Select a notice Tone to send to notify a transceiver that a call from a
SIP phone has arrived.
• Not used:
• Notice Tone 1 ~ 3: Sends the selected notice Tone
The notice Tone to send to a transceiver while calling a target SIP
phone.
The notice Tone to send to a transceiver alerting that the target SIP
phone answered the call.
The notice Tone to send to a transceiver alerting that the target SIP
phone has hung up the call.
The notice Tone to send to a transceiver alerting that the call could
arrive at the target SIP phone.
Set the volume level of the notice Tones
• Range: –12 (minimum) ~ +6 (maximum) (dB)
Does not send a notice Tone
(The transceiver automatically answers.)
( The transceiver can answer by pushing [PTT] between
the notice Tones.)
13-51
(Default: not used)
(Default: notice Tone 2)
(Default: notice Tone 2)
(Default: notice Tone 3)
(Default: notice Tone 3)
(4 ~ 8). (Default: 0)