Icom VE-PG4 Operating Manual page 93

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
PTT Lock ��������
5
PTT Call at Stand-by ���
6
1
2
3
4
5
6
7
8
9
Select "Enable" to lock the IP100H's PTT switch.
L When this setting is set to "Enable," the IP100H cannot transmit by holding
down its PTT switch, but it can transmit with an optional microphone or using
the VOX function as well.
Select whether or not the IP100H displays the Destination ID (Call type)
in the standby mode.
• Disable: The Destination ID (Call type) is not displayed in the
standby mode.
L The Destination ID (Call type) is displayed when you select the
• Enable: The Destination ID (Call type) is displayed in the standby
mode.
L When the PTT on the IP100H is pushed, the IP100H calls the
ID using the function keys.
displayed ID (Call type).
6-22
(Default: Disable)
(Default: Enable)