Icom VE-PG4 Operating Manual page 363

13
PBX EXTEnSIon
Converter Bridge screen
PBX Extension > Converter Bridge
■ PTT Control Setting
The VoX (voice operated transmission) function automatically switches the connected transceiver to transmit,
when the RoIP gateway receives an audio signal to the Converter Bridge connection destination device.
Attack Time ������
1
Release Time ������
2
Voice Delay �������
3
VOX Threshold �����
4
1
2
3
4
Enter the TX delay time.
• Range: 5 ~ 500 (milliseconds) in 5 millisecond steps
• After the continuous signal for the set period of time is received from a SIP
phone, the transceiver controller starts to transmit.
Select the RX delay time.
• Range: 5 ~ 2000 (milliseconds) in 5 millisecond steps
This is the delay time for the VoX to turn oFF, after no audio signal is
received through the network.
Set the audio signal buffer time to prevent intermittent audio.
• Range: 0 ~ 500 (milliseconds) in 5 millisecond steps
The voice delay is the amount of time the RoIP gateway stores the
transmitted audio to prevent missing the first part of the speech.
Set the voice threshold level.
• Range: 0 ~ 100 (%)
The VoX function automatically switches between receive and transmit
according to this threshold level. The lower values make the VoX
function more sensitive to the voice input.
13-70
(Default: 50)
(Default: 500)
(Default: 200)
(Default: 40)