Table of Contents
Advertisement
7
CONNECTION PORT SETTINgS
Microphone (MIC) screen
Connection Port Settings > Microphone (MIC)
■ Bridge Communication
Edit the settings of the microphone connected to the RoIP gateway.
Encryption
1
TalkBack
2
Call Type
3
Destination Prefix ID
4
Destination ID
5
Source ID
6
1
2
3
4
5
6
Select whether or not to enable the Encryption function.
When you enable the function, enter an encryption key between 1 and
32767.
Select whether or not to enable the TalkBack function.(Default: Enable)
When the function is enabled, Select the TalkBack time.
• Range: 1 ~10 (seconds)
Select a call type.
• Options: Individual, group, or All
Enter a destination prefix ID. The ID may differ, depending on the
system.
• Range: 0 ~30
Enter an Individual or group ID of the destination transceiver between 1
and 9999999.
L Enter an ID between 00001 and 99999 when the Destination Prefix ID (4) is
entered.
Enter a stationʼs source ID between 1 and 9999999. The ID is sent to
the destinations.
7-52
(Default: Disable)
(Default: 1)
(Default: 5)
(Default: group)
(Default: Blank)
(Default: 1)
(Default: 311)
Advertisement
Chapters
Table of Contents
