Icom VE-PG4 Operating Manual page 201

7
CONNECTION PORT SETTINgS
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■ EXT Output Settings
Client Mode: Enable
L The screen shows Serial Communication (6) and Client Mode (7) is set to "Enable."
Server Address
18
Server Port Number
19
Connection Status
20
6
7
18
19
9
10
12
13
14
15
16
20
Enter the destination RoIP gateway's IP address.
Enter the destination RoIP gateway's port number between 1024 and
65535.
(Default: EXT1=50000, EXT2=50001, EXT3=50002, EXT4=50003)
Click to connect or disconnect a transceiver, or to refresh the
connection status.
L The buttons are grayed out when Connected Repeater's Address is blank.
L The settings cannot be changed while connection is established. Click
<Disconnect> before changing the settings on this screen.
7-47