Icom VE-PG4 Operating Manual page 194

7
CONNECTION PORT SETTINgS
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■ EXT Input Settings
Control Signal Type
12
ON Timer
13
OFF Timer
14
6
7
8
9
10
11
12
13
14
15
16
17
Select the control signal input type.
• Momentary:
• One-shot:
Select the delay time until the input is detected.
• Range: 0.1 ~ 3 (seconds)
Select the delay time until the port (B3/B4 terminal (general control
input)) is deactivated.
• Range: 0.1 ~ 3 (seconds)
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
Refer to the INSTALLATION gUIDE Section 6 for the port details.
While the control signal is input from the B3/B4 terminal
(general control I/O), activates the port.
When the control signal is input from the B3/B4 terminal
(general control I/O), continuously activates the port.
And deactivates with no input. The input signal has been
detected for the period of time, that is set in the ON Timer
(13 ). The RoIP gateway recognizes the signal input and
retains the type for the period of time, that is set in the
OFF Timer (14 ).
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
A1~A4 A1~A4 B1~B4 B1~B4 C1~C4 C1~C4
7-40
(Default: Momentary)
(Default: 1)
(Default: 1)