Icom VE-PG4 Operating Manual page 161

7
CONNECTION PORT SETTINgS
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■ Communication Settings
Edit the settings required for calling transceivers from the digital transceiver connected to the RoIP gateway.
TalkBack
1
RX All Call
2
Call Type
3
Destination Prefix ID
4
Destination ID
5
System: NXDN-Trunking
1
2
3
4
5
Select whether or not to enable to talkback from a client transceiver,
when a digital transceiver that is connected to the RoIP gateway has
called to the client transceiver.
When the function is enabled, select the TalkBack time.
• Range: 1 ~ 10 (seconds)
Select whether or not to permit all Talkgroups to receive a call.
Select a call type to call from the transceiver, that is connected to the
RoIP gateway, to its client transceiver(s).
• Options: Individual, group, or All
Enter a destination prefix ID of a client transceiver.
• Range: 1 ~ 30
Displayed only when the Call Type (3) is set to "Individual" or "group."
Enter an Individual or group ID of the client transceiver.
• Range: 1 ~ 2000.
7-7
(Default: Enable)
(Default: 5)
(Default: Disable)
(Default: group)
(Default: 1)
(Default: 1)