Icom VE-PG4 Operating Manual page 215

7
CONNECTION PORT SETTINgS
RoIP gateway screen
Connection Port Settings > RoIP gateway
■ Bridge Communication
The settings for the Bridge Communication when a Bridge Connection Destination is set to "Custom Bridge Connection."
(Bridge Connection Settings > Bridge Connection > Bridge Connection > Bridge Connection Destination)
Encryption
1
TalkBack
2
Call Type
3
Destination Prefix ID
4
Destination ID
5
Source ID
6
<Apply>
7
<Reset>
8
1
2
3
4
5
6
Select whether or not to enable the Encryption function, depending on
the connected transceiverʼs setting.
When you enable the function, enter an encryption key between 1 and
32767.
Select whether or not to enable the TalkBack function with devices
connected to the RoIP gateway.
When the function is enabled, Select the TalkBack time.
• Range: 1 ~ 10 (seconds)
Select a call type.
• Options: Individual, group, or All
Enter a destination prefix ID. The ID may differ, depending on the
system.
• Range: 0 ~30
Enter an Individual or group ID for the destination transceiver between
1 and 9999999.
L Enter an ID between 00001 and 99999 when the Destination Prefix ID (4) is
entered.
Enter the stationʼs source ID between 1 and 9999999. Used for calling
transceivers connected to the serial port.
Click to apply the settings.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
7-61
7 8
(Default: Disable)
(Default: 1)
(Default: Enable)
(Default: 5)
(Default: group)
(Default: 1)
(Default: 1)