Icom VE-PG4 Operating Manual page 115

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
(This is an example of when the [Lone Worker] (42) is set to "Enable.")
Alert Tone��������
41
Emergency: Enable
Lone Worker ������
42
Emergency: Enable
Lone Worker ON Timer ��
43
Lone Worker: Enable
41
42
43
44
45
Select whether or not to cancel an Emergency call after the set period
of time has passed.
If you select "Enable," set the Volume (audio level) to between 0 and
32, and select the action.
L In the [Alert Tone Action], select "Notification Beep," "Vibration," or
"Notification Beep + Vibration" to activate when an Emergency call is
received.
If the Lone Worker function is activated, the Emergency function is
automatically turned oN after the set period of time has passed with no
operation.
Enter the period of time for starting the Lone Worker function.
• Range: 1 ~ 255 (minutes)
L When the IP100H is operated within the period of time in this item, the times
for [Lone Worker ON Timer] (43) and [Lone Worker Reminder Timer] (44) are
reset.
(Default: 32, Notification Beep+Vibration)
in 1 second steps
6-44
(Default: Enable)
(Default: Disable)
(Default: 60 (minutes))