Icom VE-PG4 Operating Manual page 44

4
RouTER SETTINGS
IP Filter screen
Router Settings > IP Filter
■ IP Filter
The settings to pass or block the packets that match the registered filtering settings.
L When [LAN Port] is set in Connection type, this setting cannot be changed.
L Icom is not responsible for any results caused by a decline in security due to changing the IP filter.
1
2
3
4
5
6
7
8
9
10
11
L This is an example of setting "TCP" as the protocol.
No. �����������
1
Entry ����������
2
Action ���������
3
Select the filtering order.
• Range: 1 ~ 64
L The number registered in [List of IP Filter Entries] cannot be selected.
The filter function checks the packets in the selected order according to
the filter setting in [list of IP Filter Entries].
Select "Enable" to apply the filter setting.
Select "Disable" in the unused filter entry.
If the filter is registered in "Disable," (oFF) is displayed in [No.] of [
].
IP Filter Entries
L This is an example when number "1" is disabled.
Select the filtering method.
• Block: Blocks all packets that match the filtering settings.
• Pass: Passes all packets that match the filtering settings.
4-17
12 13
(Default: 1)
(Default: Enable)
List of
(Default: Pass)