Ip Transceiver Status Filtering Screen; M Ip Transceiver Status Filtering - Icom VE-PG4 Operating Manual

9
ExPERT SETTINGS

IP Transceiver Status Filtering screen

Expert Settings > IP Transceiver Status Filtering
■ IP Transceiver Status Filtering
Filter settings for transceiver information output to a position information software.
L These settings are for future use.
IP Transceiver Status Filtering
1
Filtering Policy �����
2
<Apply> ��������
3
<Reset> ��������
4
1
2
Select whether or not to use the Filtering function.
Select whether allow or deny outputting the transceiver information
listed on the Filtering List.
• Allow List: Output the listed transceiver information.
• Deny List: Filter the listed transceiver information.
Click to apply the settings.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
9-6
3 4
(Default: Disable)
(Default: Allow List)