Icom VE-PG4 Operating Manual page 183

7
CONNECTION PORT SETTINgS
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■ Transceiver Control
These items are displayed when "Transceiver" is selected as a connected unit.
(Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port)
Edit the control settings for transceivers connected to the EXT1 ~ EXT4 ports.
These items are displayed only when "Connection Unit" is set to "Transceiver."
and are displayed only when the Transceiver Model is set to "general Setting."
L 2, 8 9
RX Volume
6
Additional Attack Time for
7
Beep Sound Elimination
Echo Canceller
8
Noise Canceller
9
1
2
3
4
5
6
7
8
9
Adjust the RoIP gateway's audio output level of the audio signal that is
received from the connected transceiver
• Range: –12 ~ +6 (dB)
Enter the period of time to mute the audio (including beep signals) from
the connected transceiver.
• Range: 0 ~ 1000 (seconds) in 5 millisecond steps
Select whether or not to enable the Echo Canceller function. The
function reduces echo caused during duplex communication.
Select whether or not to enable the Noise Canceller function.
7-29
(Default: 0)
(Default: 400)
(Default: Disable)
(Default: Disable)