Icom SB-110 Instruction Manual
  1. Manuals
  2. Brands
  3. Icom Manuals
  4. Gateway
  5. SB-110
  6. Instruction manual
Icom SB-110 Instruction Manual

Icom SB-110 Instruction Manual

Wireless lan bridge
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PDF取説-E_1 02.1.23 10:28 ページ1
INSTRUCTION MANUAL
1
BEFORE INSTALLATION
2
WIRELESS LAN BRIDGE
INSTALLATION AND CONNECTION
SB-110
3
SETTING YOUR PC
4
SETTING SB-110
5
SETTING SCREEN
6
MAINTENANCE
7
FOR YOUR REFERENCE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SB-110 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Icom SB-110

Summary of Contents for Icom SB-110

  • Page 1 PDF取説-E_1 02.1.23 10:28 ページ1 INSTRUCTION MANUAL BEFORE INSTALLATION WIRELESS LAN BRIDGE INSTALLATION AND CONNECTION SB-110 SETTING YOUR PC SETTING SB-110 SETTING SCREEN MAINTENANCE FOR YOUR REFERENCE...
  • Page 2 LAN system of two or more buildings up to 11Mbps for 800m(0.5mile) wirelessly. Each LAN system needs at least one unit of SB-110 for bridg- ing. One single unit may work as a wireless LAN ac- cess point alternatively. Please read this instruction manual before using SB-110.
  • Page 3 PRODUCT OVERVIEW ◎ Two or more SB-110s bridge LAN systems of buildings or rooms while eliminating wiring between them. Single SB-110 unit works as access point for wireless LAN cli- nents at alternative setting. ◎ SB-110 can be easily configured with common web browser software.
  • Page 4 FCC standards FOR HOME OR OFFICE USE CAUTION: Changes or modifications not expressly approved by Icom Inc. could void the user’s authority to operate this SB-110. Class B digital device users; This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 5 PC and other peripheral devices. ◎ SB-110 may cause the signal interference when it is used in your house. When the in- terference occurs, move SB-110 as far as possible away from the affected household electric appliance.

  • Page 6: Optional Accessories

    CONTENTS OF STANDARD PACKAGE This SB-110 package contains the components below. ■ Checking Contents Before using SB-110, check whether all of those of Package components are contained completely in the package. If any of the components is not contained in the package, please contact the shop or our service section.

  • Page 7: Table Of Contents

    3-2.Connecting through Wireless Access Point ……………22 3-3.Preparing WWW Browser ………………………………28 3-4.Checking IP Assigned Address …………………………29 4. SETTING SB-110 ──────────────────33 4-1.Turning on SB-110 and PC ………………………………34 4-2.Showing Setting Screen …………………………………35 4-3.Changing Wireless Communication Mode ……………36 4-4.Stopping DHCP Server …………………………………37 4-5.Changing IP Address Of SB-110 ………………………38 4-6.Changing Automatic Assignment Start IP Address ……39...
  • Page 8 Contents 6-3 Checking or Saving Settings ……………………………68 6-4 Writing Saved Settings……………………………………69 6-5 Returning Setting to Default State ………………………70 6-6 Upgrading SB-110 ………………………………………74 6-7 When the unit fails ………………………………………77 7. FOR YOUR REFERENCE ──────────────79 7-1 Examples of Routing Setting ……………………………80 7-2 Setting Screen Overview …………………………………83 7-3 List of Initial Values of Setting Items ……………………84...

  • Page 9: Safety Precautions

    SAFETY PRECAUTIONS Be sure to read these precautions in order to use SB-110 safely. ¡ These precautions are intended to ensure that SB-110 is operated safely and cor- rectly. Follow these instructions to avoid property damage and prevent personal injury to yourself (user) or others in the vicinity.
  • Page 10 ◎ Do not use SB-110 in the site where 110 may become out of order. strong magnetic fields or static elec- ◎ Do not use SB-110 near the TV set or tricity is generated or where is ex- radio. posed to the temperature or humidity...
  • Page 11 Otherwise, a it may catch fire, you may If the plug is not inserted completely, a get an electric shock and SB-110 may it may catch fire or you may get an become out of order. electric shock.
  • Page 12 PDF取説-E_1 02.1.23 10:28 ページxi...
  • Page 13 PDF取説-E_1 02.1.23 10:28 ページ1 CHAPTER 1 BEFORE INSTALLATION This chapter describes what you should consider and prepare when you in- stalling SB-110. 1-1. Name and Function of Component …………………………………………………2 1-2. Radio Communication Function ……………………………………………………3 1-3. Using in Building Communication Mode ……………………………………………3 1-4.

  • Page 14: Before Installation ──────────────1

    Turns on when the connection to LAN has been established normally. Turns off when the Ethernet cable is not connected. Blinks when data is communicated. ※ A plate to fix SB-110 cable. If you connect a commercial ground cable, fix it with the screws for this plate.

  • Page 15: 1-2.Radio Communication Function

    ● Access Point mode (see 1-4) ● Roaming function (see 1-5) SB-110 operates in the Building Communication mode by default or when all the settings are initialized. Those two modes cannot be used simultaneously. 1-3 Using in Building Communication Mode In this network system, by connecting those units facing to each other in the Wire- less Bridge mode, those wired LAN can be connected in a wireless system.

  • Page 16: 1-4.Using In Access Point Mode

    SB-110 by wireless or a terminal connected to SB-110 through Ethernet is connected to a wireless terminal through SB-110 by wireless. If you use SB-110 as an access point, you need to change the default setting ( see 4-3) using a PC connected to SB-110 through a hub on Ethernet LAN.

  • Page 17: 1-5.Using Roaming Function

    If you use the roaming function, you need to change the default setting ( see 4-3) into the Access Point mode using a PC connected to SB-110 through a hub on Ethernet LAN. * To connect several SB-110s, use a hub.

  • Page 18: Notes On Use Of Roaming Function

    ◎ The roaming function is enabled in the Access Point mode and, therefore, this function cannot be used in the Building Communication mode. ◎ Any terminal connected to SB-110 by wireless must be equipped with our 11 Mbps wireless LAN card.

  • Page 19: 1-6.Notes On Installation

    ◎ Do not install SB-110 near a radio tower which sends a strong radio wave. ◎ Do not install SB-110 near a metal wall of warehouse. A radio wave may be reflected. ◎ If the communication is made between the different floors, neither steel beam nor fire- proof metal material must be embedded in the floor.
  • Page 20 PDF取説-E_1 02.1.23 10:28 ページ8...
  • Page 21 ■ Connecting to Existing LAN ……………………………………………………13 【 Remarks】 ◎ Do not paint the case of SB-110. Otherwise, the radio wave is attenuated by metal composition contained in the paint and SB-110 cannot show the performance fully. ◎ Fix the power cable connected to SB-110 and any other connecting cables to a suitable position where nobody can touch.

  • Page 22: Installation And Connection ─────────9

    PDF取説-E_1 02.1.23 10:28 ページ10 INSTALLATION AND CONNECTION 2-1 Installing on Mast When you install two SB-110 (the built-in antenna type), any obstruction must not be lo- cated between those SB-110s. * The installation with the elevation angle bracket (MB-89), an optional accessory, is...

  • Page 23: 2-2.Fixing On Wall

    PDF取説-E_1 02.1.23 10:28 ページ11 INSTALLATION AND CONNECTION 2-2 Fixing on Wall To fix SB-110 on the wall, use the tapping screws or hexagonal head bolts which come with SB-110. [Fixing with Hexagonal Head Bolt] Hexagonal Head Bolt S Washer M6 x 50...

  • Page 24: 2-3.How To Connect

    INSTALLATION AND CONNECTION 2-3 How to Connect If SB-110 of a default status is connected to a network in operation, an unexpected accident may happen, e.g., the conflict in the IP address. When you set SB-110, refer to "Setting SB-110" ( see 4) also.

  • Page 25: 2-4.Before Connecting Existing Lan

    110 according to the IP address assignment system specified in the LAN in advance. * To change the IP address of SB-110, refer to "How to Change IP Address" ( see 4-5). [Connection to environment that fixed IP address is assigned] Assign an available IP address to SB-110.
  • Page 26 PDF取説-E_1 02.1.23 10:28 ページ14...

  • Page 27: Setting Your Pc

    CHAPTER 3 SETTING YOUR PC This chapter describes how to set a PC which communicates with SB-110. Read an applicable section as necessary. 3-1. Connecting in Building Communication Mode ……………………………………16 ■ Connecting to Ethernet Cable of SB-110 ……………………………………16 ■ Setting TCP/IP Protocol [Windows Me] ……………………………………………………………………16...

  • Page 28: 3-1.Connecting In Building Communication Mode

    Checking IP Address Assigned by SB-110 ━━━29 ■ Connecting to Ethernet Cable of SB-110 Referring to the description of 2-3, connect the Ethernet cable of SB-110 to your PC through the hub. If your PC has no Ethernet port, you need to mount any commercial Eth- ernet card to the PC.

  • Page 29: Setting Your

    PDF取説-E_1 02.1.23 10:28 ページ17 SETTING YOUR PC [Windows Me] (continued from the previous page) Check 3. Click [TCP/IP] and then [Properties (R)]. Click Click...
  • Page 30 PDF取説-E_1 02.1.23 10:28 ページ18 SETTING YOUR PC 3-1 Connecting in Building Communication Mode ■ Setting TCP/IP Protocol [Windows Me] (continued from the previous page) 4. Click the [Obtain an IP address automatically (O)] radio button and then [OK]. Click Click 5.

  • Page 31: [Windows 2000]

    PDF取説-E_1 02.1.23 10:28 ページ19 SETTING YOUR PC ■ Setting TCP/IP Protocol (continued from the previous page) [Windows 2000] 1. Start your PC. ¡The Windows 2000 log-on screen is shown. 2. Log on as the Administrator. 3. When the Windows 2000 desktop has been shown, select [Start] → [Setting (S)] → [Network and Dial-up Connections (N)] →...
  • Page 32 PDF取説-E_1 02.1.23 10:28 ページ20 SETTING YOUR PC 3-1 Connecting in Building Communication Mode ■ Setting TCP/IP Protocol [Windows 2000] (continued from the previous page) 5. If [Internet Protocol (TCP/IP)] is shown, click [Internet Protocol (TCP/IP)] and then [Prop- erties (R)]. Click Click 6.

  • Page 33: [Mac Os]

    PDF取説-E_1 02.1.23 10:28 ページ21 SETTING YOUR PC [Mac OS] 1. Start your PC. 2. When your PC has started up, select [Apple Menu] → [Control Panel] → [TCP/IP]. 3. Specify "Ethernet" as [Connect to] and "Using DHCP Server" as [Configure]. 4.

  • Page 34: 3-2.Connecting Through Wireless Access Point

    If SB-110 is set to the Access Point mode ( 4-3), mount any wireless LAN card specified by us to your PC which can be connected to SB-110 by wireless. If the PC has no PCM- CIA slot, you need to mount out wireless LAN card adapter to the PC. Mount it according...
  • Page 35 PDF取説-E_1 02.1.23 10:28 ページ23 SETTING YOUR PC Check 3. Click [TCP/IP] and then [Properties (R)]. Click Click...
  • Page 36 PDF取説-E_1 02.1.23 10:28 ページ24 SETTING YOUR PC 3-2 Connecting through Wireless Access Point ■ Setting TCP/IP Protocol [Windows Me] (continued from the previous page) 4. Click the [Obtain an IP address automatically (O)] radio button and then [OK]. Click Click 5.

  • Page 37: [Windows 2000]

    3. When the Windows 2000 desktop has been shown, select [Start] → [Setting (S)] → [Network and Dial-up Connections (N)] → [Local Area Connection] (which shows your Ethernet card name). Double-click 4. Click [Local Area Connection] which shows your wireless LAN card connecting SB-110. Click...
  • Page 38 PDF取説-E_1 02.1.23 10:28 ページ26 SETTING YOUR PC 3-2 Connecting through Wireless Access Point ■ Setting TCP/IP Protocol [Windows 2000] (continued from the previous page) 5. If [Internet Protocol (TCP/IP)] is shown, click [Internet Protocol (TCP/IP)] and then [Prop- erties (R)]. Click Click 6.

  • Page 39: Setting Wireless Lan Card

    ¡ Use a suitable wireless LAN card which supports SB-110. Otherwise, no communication can be made. ¡ Write down the value set in SB-110 exactly and be sure to set such value in all the devices to be com- municated by wireless.

  • Page 40: 3-3.Preparing Www Browser

    PC, whether it is connected by wireless or not, check the "proxy server function" is dis- abled in the browser setting. If you want to use the proxy server, do not take SB-110 as an object of the proxy server ac- cording to the procedure below.

  • Page 41: 3-4.Checking Ip Assigned Address

    【 If automatic assignment fails】 If the network section of IP address of PC is different from that (192.168.0.1) of IP address of SB-110, the automatic IP address assignment may fail. Check the TCP/IP protocol settings of your Ethernet cared or wireless LAN card and the cable connection and restart the PC.

  • Page 42: [Windows 2000]

    PDF取説-E_1 02.1.23 10:28 ページ30 SETTING YOUR PC 3-5 Checking IP Assigned Address (continued from the previous page) [Windows 2000] Execute "ipconfig" in the Command Prompt screen. <How to check> 1. Select [Start] → [Programs (P)] → [Accessories] → [Command Prompt]. 2.

  • Page 43: [Mac Os]

    PDF取説-E_1 02.1.23 10:28 ページ31 SETTING YOUR PC [Mac OS] Even when the PC has started up, the DHCP server does not give the IP address until communication is made actually (i.e., until you access the internet or you access a mail server).
  • Page 44 PDF取説-E_1 02.1.23 10:28 ページ32 SETTING YOUR PC 3-5 Checking IP Assigned Address [Mac OS] (continued from the previous page) 3. Click [Info]. To show the left screen when the right screens is shown, select [File] in the menu bar and then [Get Info]. Check...
  • Page 45 CHAPTER 4 SETTING SB-110 This chapter describes the setting procedure to use SB-110 for the first time or to initialize the entire configuration. To perform setting using a WWW browser from a PC connected to SB-110 by wireless, you need to change...

  • Page 46: 4-1.Turning On Sb-110 And Pc

    3. Turn on the PC connected to the hub. 4. Check that the IP address is assigned from SB-110 ( 3-4). * When the IP address is not assigned, the SB-110 setting screen cannot be shown. Check the TCP/IP setting, etc. in "Connecting in Building Communication Mode"...

  • Page 47: Setting

    <How to operate> 1. Start a WWW browser. * This WWW browser is Internet Explorer 5.0. 2. Specify "http://192.168.0.1" (default setting). This is URL of SB-110. ¡The [Wireless LAN Settings] screen is shown. ■ [Wireless LAN Settings] Screen [Set] / [Cancel] / [Set &...

  • Page 48: 4-3.Changing Wireless Communication Mode

    2. Operate as follows: The default value of any other items should not be changed. * ESS ID of SB-110 is set to "LG" (upper case, falf size) as a default value. Check ESS ID of your wireless LAN card before connecting SB-110.

  • Page 49: 4-4.Stopping Dhcp Server

    ¡"Now rebooting" is displayed on the screen and the specified details are enabled. Click Click Click 4. Change the IP address of SB-110 and of PC according to the IP address assignment specified in an existing network ( see 4-5) and then restart the system.

  • Page 50: 4-5.Changing Ip Address Of Sb-110

    The IP address consists of two elements, i.e., the network section and host section. For "192.168.0.1" (Class C) which is the default IP address of SB-110, the first part "192.168.0" is the network section and the second one "1" is the host section. Any network devices (e.g., PC etc.) which have the same network sec- tion are presumed to be on the same network.

  • Page 51: 4-6.Changing Automatic Assignment Start Ip Address

    "winipcfg.exe" ( see 3-4) or restart the PC. 【 DHCP Server Function】 If the DHCP server function of SB-110 is enabled (the default setting), the IP address can be obtained from SB-110 automatically when a PC has been connected to SB-110.
  • Page 52 PDF取説-E_1 02.1.23 10:28 ページ40...
  • Page 53 CHAPTER 5 SETTING SCREEN This chapter describes every item in the SB-110 setting screen. 5-1. [Wireless LAN settings] Screen ……………………………………………………42 ■ Wireless LAN setting ……………………………………………………………42 ■ MAC Address security setting …………………………………………………43 5-2 [Detail settings] Screen ……………………………………………………………45 ■ Detail settings ……………………………………………………………………45 ■...

  • Page 54: Setting Screen ─────────────────41

    SB-110s with the same [ESS] ID can be connected to each others by wireless. In the Access Point mode ( see 1-4), SB-110 and a wireless terminal can be con- nected by wireless. To enable the changed settings, you need to reboot SB- 110.

  • Page 55: Mac Address Security Setting

    Specify whether only SB-110 with the same MAC address security …………… as one registered in advance or wireless terminal with such same MAC address can be connected to SB-110 or not (default setting: no). * To enable the setting change, click [Set & Reboot].
  • Page 56 SETTING SCREEN 5-1 [Wireless LAN settings] Screen ■ MAC Address security setting (continued from the previous page) The status of device communicating to SB-110 by wire- Current settings … less and the MAC address of registered wireless commu- nication device are displayed here (default setting: no).

  • Page 57: Detail Settings] Screen

    PDF取説-E_1 02.1.23 10:28 ページ45 SETTING SCREEN 5-2 [Detail settings] Screen Specify the details of the wireless section of SB-110. ■ Detail settings Specify a channel to be used for the wireless communica- Channel …………… tion of SB-110 (default setting: 11).
  • Page 58 PDF取説-E_1 02.1.23 10:28 ページ46 SETTING SCREEN 5-2 [Detail settings] Screen ■ Detail settings (continued from the previous page) Specify the percentage to encrypt a data sent through the Security Level …… wireless LAN to protect the data (Default setting: None). WEP (Wired Equivalent Privacy) is used as the encryption method.

  • Page 59: Custom Security

    PDF取説-E_1 02.1.23 10:28 ページ47 SETTING SCREEN 5-2 [Detail settings] Screen (continued from the previous page) Specify the items (except [WEP Key]) below when ■ Custom Security "Customs" is selected in [Security Level] of [Detail Setting]. Decryption of Setting for decryption of received packet. Select any of Received Packet …...
  • Page 60 PDF取説-E_1 02.1.23 10:28 ページ48 SETTING SCREEN 5-2 [Detail settings] Screen ■ Custom Security (continued from the previous page) Number of Specify the number of bits which encrypt the character Encryption Bits…… string entered in [Key Generator] of [Detail Settings] (de- fault setting: 64 bits).
  • Page 61 PDF取説-E_1 02.1.23 10:28 ページ49 SETTING SCREEN 5-2 [Detail settings] Screen ■ Custom Security (continued from the previous page) Specify a key and character string used for encryption (de- WEP Key…………… fault setting: 1). To encrypt data, use the alphanumeric characters of hexa- decimal notation displayed in the checked [Key Selection] text box.

  • Page 62: Hidden Terminal

    (Cts) signal repeatedly to the wireless terminals [A] and [C]. Then, either of those two wireless terminals, which does not send Rts, can recognize that SB-110 [B] is communicating with the hidden terminal. Now, the wireless terminal [A] or [C] , which does not send Rts, forbears the access to SB-110 [B] and the communi- cation collision can be prevented.

  • Page 63: Relation Between [Security Level] And [Custom Security]

    PDF取説-E_1 02.1.23 10:28 ページ51 SETTING SCREEN 5-2 [Detail settings] Screen (continued from the previous page) ■ Relation between [Security Level] and [Custom Security] WEP Setting Number of Decrypt Abandon any Encrypt Encryption Factor received packet not transmitting Bits packet encrypted packet Setting Not decrypt...

  • Page 64: Example Of [Wep Key] Setting

    PDF取説-E_1 02.1.23 10:28 ページ52 SETTING SCREEN 5-2 [Detail settings] Screen (continued from the previous page) ■ Example of [WEP Key] Setting When the WEP key is set for 64-bit encryption: Two-way communication available Two-way communication available Communication unavailable...

  • Page 65: Ip Address] Screen

    Access Available protocol is TCP/IP only. Point mode, any wire- To enable the changed setting, you need to restart SB-110. less terminal cannot be If the routing mode is used, traffic of unnecessary broad- used for roaming be- cast can be minimized when communication is made.

  • Page 66: Ip Address

    PDF取説-E_1 02.1.23 10:28 ページ54 SETTING SCREEN 5-3 [IP address] Screen (continued from the previous page) Setting for the IP address and subnet mask of SB-110. ■ IP address Wired LAN / The IP address and subnet mask set in the wired LAN Wireless LAN………...

  • Page 67: Dhcp Server

    5-3 [IP address] Screen (continued from the previous page) Setting for the DHCP server function of SB-110. ■ DHCP Server Specify whether SB-110 is used as the DHCP server or Use DHCP Server … not (default setting: Yes). If TCP/IP of PCs connected to SB-110 through cable or by wireless is set to [Obtain an IP address automatically], those PCs become the DHCP client of SB-110.
  • Page 68 Primary DNS Server checked, if there are two DNS server addresses, enter the either one in this field as necessary. Instead of the IP ad- dress of SB-110, the entered DNS server address is no- ticed to the DHCP client.
  • Page 69 PDF取説-E_1 02.1.23 10:28 ページ57 SETTING SCREEN 5-3 [IP address] Screen ■ DHCP Server (continued from the previous page) Secondary DNS Similarly with [Primary DNS Server] above, enter the ei- Server ……………… ther of the two DNS server address in this field as neces- sary.

  • Page 70: Static Dhcp Server

    PDF取説-E_1 02.1.23 10:28 ページ58 SETTING SCREEN 5-3 [IP address] Screen (continued from the previous page) Setting to fix the IP address assigned to a specific ■ Static DHCP Server client. Field to register the combination of the MAC address and IP address of a PC when fixing the IP address, which is assigned automatically using the DHCP server, to a spe- cific client.

  • Page 71: Routing Function] Screen

    PDF取説-E_1 02.1.23 10:28 ページ59 SETTING SCREEN 5-4 [Routing function] Screen ■ RIP Specify when exchanging routing information with an adjacent router or access point by using the RIP func- tion to create a route dynamically. Specify whether the RIP function is used or not (default setting Yes).

  • Page 72: Ip Routing Information

    PDF取説-E_1 02.1.23 10:28 ページ60 SETTING SCREEN 5-4 [Routing function] Screen (continued from the previous page) ■ IP Routing Information This screen shows the information about a router or terminal to which another router sends a packet. The screen shows a path added in [Static Route] also. Shows the IP address of destination of packet routing.

  • Page 73: Static Route

    PDF取説-E_1 02.1.23 10:28 ページ61 SETTING SCREEN 5-4 [Routing function] Screen (continued from the previous page) Routing table to define a relay path of packet inten- ■ Static Route tionally. A maximum of 20 items can be registered. * When you have entered data, click [Add] to check that the data has been registered in the [Current setting] field.

  • Page 74: Administration] Screen

    ■ Manager ID Setting for restriction of access to the setting screen of SB-110. If you restrict the access to the setting screen of SB-110, Manager ID………… enter a name of manager within 31 alphanumeric charac- ters. Please note that the name is case-sensitive.

  • Page 75: Syslog

    PDF取説-E_1 02.1.23 10:28 ページ63 SETTING SCREEN 5-5 [Administration] Screen (continued from the previous page) ■ SYSLOG Perform the setting to output log information, etc. to a specified host address. Specify whether debug information is output to SYSLOG Use DEBUG ……… or not (default setting: Yes).

  • Page 76: Use Utility (Firmware Update Mode)

    SETTING SCREEN 5-5 [Administration] Screen (continued from the previous page) ■ Use utility (Firmware Update Mode) Use when you return SB-110 to the default state or up- date the firmware with the utility which comes with SB-110. Check the [Check] check box and click [GO] to enter the [Use utility] mode and start an operation.
  • Page 77 CHAPTER 6 MAINTENANCE This chapter describes the procedure to restrict the connection to the setting screen of SB-110, to save or initialize the details and update the firmware. Read this chapter as necessary. 6-1 CD-ROM of SB-110 …………………………………………………………………66 ■ Contents …………………………………………………………………………66 ■...

  • Page 78: Cd-Rom Of Sb-110

    ¡SB-110 Utility (for Windows) Use to initialize ( see 6-6) the entire configuration of SB-110 or update ( see 6-6) it. ■ Auto Run Function When you insert the CD-ROM into a CD-ROM drive of your PC/AT compatible machine, a menu screen is shown automatically.

  • Page 79: Maintenance ──────────────────65

    The Manager enters a maximum of 31 half size alphanumeric characters which are case- sensitive. 1. Start a WWW browser and access the SB-110 setting screen ( see 4-2). ¡The [Wireless LAN Settings] screen is shown. 2. Click [Administration] in the left frame.

  • Page 80: Checking Or Saving Settings

    MAINTENANCE 6-3 Checking or Saving Settings You can check the details specified in every setting screen of SB-110 and can save them in a file of hypertext (HTML) format. You can use the saved settings when the settings have been lost by accident.

  • Page 81: Writing Saved Settings

    Otherwise, an error may occur. Be sure to start the WWW browser again when you access the setting screen. [R Remarks] Do not write any configuration file created by SB-110 into any products of the same type nor any products other than SB-110.

  • Page 82: Returning Setting To Default State

    * To return the setting to the default state with Utility, you need to start Utility in the CD- ROM which comes with SB-110. For how to start it, refer to "To Start Utility" in the "CD- ROM of SB-110" ( see 6-1).
  • Page 83 Click 8. Click [Reboot]. Click 9. When the indicators of SB-110 have been returned to the state before the [INITIALIZA- TION] mode is enabled and when the [Wireless LAN Settings] screen has been shown, the initialization ends. ¡During rebooting, the screen below is shown.

  • Page 84: B Use The Setting Screen

    B Use the setting screen If you know the IP address set in SB-110 and you can access the setting screen with such IP address, you can initialize all the settings or a certain part of the settings (e.g., the wire- less section) through the SB-110 setting screen.

  • Page 85: C Use Utility

    2. Start [SB-110 Utility]. For how to start it, refer to "To Start Utility" in the "CD-ROM of SB-110" ( see 6-1). ¡The operation screen of Utility is shown. (Refer to the screen at the next page.) 3.

  • Page 86: Upgrading Sb-110

    Click [R Remarks] Do not quit Utility nor turn off SB-110 during the execution of Utility. Otherwise, data may be lost or an error may occur in an operation. Wait until "... has been completed." is shown. 6-6 Upgrading SB-110 Use Utility contained in the CD-ROM of SB-110.
  • Page 87 ◆ Before using Utility ◆ To upgrading the firmware with Utility, enter the [Use utility] mode. Otherwise, you cannot use Utility to update the firmware. You need to access SB-110 and assign the IP address to your PC in advance.

  • Page 88: How To Update

    110 through cable or by wireless and start the operating system. 2. Start [SB-110 Utility]. For how to start it, refer to "To Start Utility" in the "CD-ROM of SB-110" ( see 6-1). ¡The operation screen of Utility is shown. (Refer to the screen.) 3.

  • Page 89: When The Unit Fails

    PDF取説-E_1 02.1.23 10:28 ページ77 MAINTENANCE 6-7 When the unit fails Warranty conditions may differ depending on your dealer. Please ask your dealer when you purchase the SB-110 about the Warranty and its conditions. Basic conditions are as follows: Warranty At the time of purchase, the retailer will provide a warranty sheet complete with the details of the purchase (date of purchase, name of local dealer, etc.).
  • Page 90 PDF取説-E_1 02.1.23 10:28 ページ78...
  • Page 91 PDF取説-E_1 02.1.23 10:28 ページ79 CHAPTER 7 FOR YOUR REFERENCE This chapter describes the examples of routing setting, setting screen overview, initial value of setting item and rating. 7-1 Examples of Routing Setting ………………………………………………………80 ■ Setting RIP Function ……………………………………………………………80 ■ Setting Routing Table ……………………………………………………………80 7-2 Setting Screen Overview……………………………………………………………83 7-3 List of Initial Values of Setting Items ………………………………………………84 7-4 List of Functions ……………………………………………………………………84...

  • Page 92: Examples Of Routing Setting

    (4 addresses) ■ Setting RIP Function [IP address] Screen ( see 5-3) [SB-110: Floor A side] * Specify the IP address at the wired side of SB-110 as a default gateway in a wired terminal. [Routing Function] Screen ( see 5-4)
  • Page 93 ■ Setting RIP Function (continued from the previous page) [IP address] Screen ( see 5-3) [SB-110: Floor B side] * Specify the IP address at the wired side of SB-110 as a default gateway in a wired terminal. [Routing Function] Screen ( see 5-4) ■...
  • Page 94 PDF取説-E_1 02.1.23 10:28 ページ82 FOR YOUR REFERENCE 7-1 Examples of Routing Setting ■ Setting Routing Table (continued from the previous page) [IP address] Screen ( see 5-3) [SB-110: Floor B side] [Routing Function] Screen ( see 5-4)

  • Page 95: Setting Screen Overview

    PDF取説-E_1 02.1.23 10:28 ページ83 FOR YOUR REFERENCE 7-2 Setting Screen Overview The overview of SB-110 setting screen displayed on a WWW browser is shown below. Wireless LAN MAC Address Security Setting [Wireless LAN Settings] Settings Screen ( see page 42)

  • Page 96: List Of Initial Values Of Setting Items

    PDF取説-E_1 02.1.23 10:28 ページ84 FOR YOUR REFERENCE 7-3 List of Initial Values of Setting Items The section lists the initial values in the WWW browser setting screen of SB-110. [Wireless LAN Settings] Screen ¡IP address: 192.168.1.1. Wireless LAN Settings ¡Subnet mask: 255.255.255.0 DHPC Server ¡ESS ID: ** LG...

  • Page 97: Rating

    7-5 Rating ■ General Specifications ¡Input voltage: DC 12 V (DC 12 V ±5%) The input voltage of the AC adapter (which comes with SB-110) is AC 120 V ±5%. ¡Consumption current: 400 mA (typically) ¡Grounding method: Minus earth ¡Installation environment: Temperature 0 to +45ﾟC...

  • Page 98: Specifications For Ethernet Plug

    PDF取説-E_1 02.1.23 10:28 ページ86 FOR YOUR REFERENCE 7-5 Rating (continued from the previous page) ■ Wired Section ¡LAN interface: Ethernet plug (Type RJ-45) * Based on IEEE802.3/10BASE-T * Based on IEEE802.3u/100BASE-TX ¡Transmission rate: 10/100 Mbps (switched automatically/half-duplex) ¡Routing method: Static/Dynamic (RIP) ¡User interface: Status indicator (PWR <Green>, MODE <Green>, LAN <Red>,...

  • Page 99: Glossary

    Internet Explorer, less LAN. In the wireless network group which a typical browser, is used. communicates to SB-110, the identifier of wire- less terminal must be the same as that of SB- Client 110.
  • Page 100 The IP addresses below can be used as the private IP address. A devices required when a network is config- ured using SB-110. Connect SB-110 to the hub Class A: 10.0.0.0 to 10.255.255.255 through 10BASE-T or 100BASE-TX cable. For Class B: 172.160.0.0 to 172.31.255.255...
  • Page 101 100 Mbit/s network address "192.168.0.0" is obtained. with twisted pair cable of Category 5. SB-110's Then, the remainder "1" is the host address. Ethernet port for LAN supports this standard.v...
  • Page 102 PDF取説-E_1 02.1.23 10:28 ページ90 Count on us! 1-1-32, Kamiminami, hirano-ku, Osaka 547-0003, Japan A-5681H-1EX ©2001 Icom Inc.

Table of Contents