Icom VE-PG4 Operating Manual page 173

7
CONNECTION PORT SETTINgS
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■ Transceiver Model
This item is displayed when "Transceiver" is selected as a connected unit.
(Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port)
Transceiver Model Select a transceiver to connect the port selected in "EXT I/O Port."
L Select "general Setting," if the transceiver requires detailed settings.
L Follow the local laws and regulations when using transceivers other than the
options.
L Remove the transceiver from the RoIP gateway to change the Transceiver
Model. All settings will be reset to the defaults.
7-19
(Default: IC-F5060/F6060)