Icom VE-PG4 Operating Manual page 231

8
DESTINATIoN SETTINGS
Destination Settings screen
Destination Settings > Destination Settings
■ Destination Settings (Talkgroup)
9
10
This is an example of setting "Talkgroup" as the Call Type
Additional Controller ��
9
Select the additional controller when configuring several controllers,
and the Talkgroup call calls between the different controllers.
L By clicking "All," you can select or cancel all entries in the list.
L When "Sub" is selected in the [Additional Controller Settings] setting
(Transceiver Controller > RoIP Settings > Additional Controller Settings),
specify the master controller as the connection destination, as shown below.
L The other bases in [Additional Controller] (9) and [IP Transceiver Controller/
Connection Port] (10) can be connected to a total of up to 22 locations.
("IP Transceiver Controller" is not included this number of connections.)
If you connect the other bases to more than 22 locations, you cannot
communicate properly.
8-16
11 12
.
(3)