Icom VE-PG4 Operating Manual page 369

14
PBX ADVANCED SETTINgS
Advanced Settings screen
PBX Advanced Settings > Advanvanced Settings
■ SIP Settings
Relay Internal Response �
4
Caller ID Relay on
5
Call Forwarding �����
Preferred Inbound
6
Call Setting �������
Use Letters for Phone
7
Number ���������
1
2
3
4
5
6
7
Set whether or not to relay an error message received from a client SIP
phone, when a call is incoming.
• Enable: Relays an error response (4xx ~ 6xx) from the SIP phone.
• Disable: Translates an error response (4xx ~ 6xx) into a 486 response and
relays it.
Set whether or not to relay the original caller number of a forwarded call
by using the Blind Transfer function.
• Not relay:
• Relay:
The original caller number is shown at the forwarded destination.
Set which line to consider when the SIP URI of an incoming call over
the IP line conflicts with the SIP URI of a Peer to Peer line.
If allowed, you can enter letters as a phone number.
Your number is shown at the forwarded destination.
14-3
(Default: Disable)
(Default: Relay)
(Default: IP Line)
(Default: Inhibit)