Icom VE-PG4 Operating Manual page 366

13
PBX EXTEnSIon
Converter Bridge screen
PBX Extension > Converter Bridge
■ Release Timer
Sets the timers for canceling or disconnecting a call.
Call Cancel Timer ����
1
No Voice Release Timer �
2
Forced Disconnect Timer
3
<Apply> ��������
4
<Reset> ��������
5
1
2
3
Enter the period of time to cancel the call. When the set time has
passed without a response from the SIP phone, the call is canceled.
• Range: 0 (oFF) or 5 ~ 60 (seconds)
Enter the period of time to stop transmitting. When the set time has
passed with no audio signal, transmitting is stopped.
• Range: 0 (oFF) or 5 ~ 600 (seconds)
Enter the period of time to be forcibly stop transmitting. When
the set time has passed, transmitting is stopped, even when the
communication is ongoing.
• Range: 0 (oFF) or 5 ~ 120 (minutes)
Click to apply the setting.
Click to reset the setting.
L You cannot reset after clicking <Apply>.
13-73
4 5
(Default: 15)
(Default: 15)
(Default: 10)