Icom VE-PG4 Operating Manual page 96

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
L The screen shows when the Message (16) is set to "enable."
Volume ���������
10
Ringer and Vibration ���
11
10
11
12
13
14
15
16
17
18
Set the beep level when the IP100H receives a Call or message to
between 0 and 32.
L When this setting set to "0," the notification beep is turned OFF.
L The notification beep is individually set for the Call type or message in
[Notification Tone] on the [Common Settings] screen.
Set the action when the IP100H receives a Call or message to
"Notification Beep," "Vibration" or "Notification Beep + Vibration."
• Notification Beep
When the IP100H receives a Call or message, the specified
Notification beep sounds, depending on the Call or message.
The notification beep is set in [Notification Tone] on the [Profile]
screen in the [Common Settings] menu.
• Vibration
When the IP100H receives a Call or message, it vibrates for
notification.
• Notification Beep + Vibration
When the IP100H receives a Call or message, it vibrates and the
Notification beep sounds for notification.
6-25
(Default: 10)
(Default: Notification Beep)