Icom VE-PG4 Operating Manual page 211

7
CONNECTION PORT SETTINgS
RoIP gateway screen
Connection Port Settings > RoIP gateway
■ RoIP Gateway Connection
The settings for a destinations that are connected to the RoIP gateway through the RoIP gateway connection.
is displayed only when the Transmission Mode (1) is set to "Multicast."
6
L
Transmission Mode
1
Destination Address
2
Destination Port Number
3
1
1
2
3
4
5
6
7
8
Select the transmission mode used on the network, for devices
connected to the RoIP gateway.
Enter the IP address or domain of the RoIP gateway that going to be
connected.
When the Transmission Mode (1) is set to "Multicast," automatically
set to "239.255.255.1."
Enter the same port number that entered to the
Source Port Number (4) of the RoIP gateway that going to be
connected.
L Enter the port number between 2 and 65534, in even number.
L Do not conflict with the other port settings.
L In the Multicast mode, all the default setting are fixed to "25210."
( Default for RoIP gateway1: 24400)
( Default for RoIP gateway2: 24402)
( Default for RoIP gateway3: 24404)
( Default for RoIP gateway4: 24406)
( Default for RoIP gateway5: 24408)
( Default for RoIP gateway6: 24410)
( Default for RoIP gateway7: 24412)
( Default for RoIP gateway8: 24414)
7-57