Icom VE-PG4 Operating Manual page 228

8
DESTINATIoN SETTINGS
Destination Settings screen
Destination Settings > Destination Settings
■ Destination Settings (Talkgroup)
The settings to call the registered Talkgroup through the IP network or the RoIP Gateway's transceiver port.
L The displayed contents are changed according to the Call Type.
This is an example of setting "Talkgroup" as the Call Type
IP100FS .
(8)
No. �����������
1
Name ����������
2
Call Type ��������
3
Destination ID ������
4
1
2
3
4
5
6
7
8
Select the number to register the destination Talkgroup.
Up to 1990 destinations can be registered.
Enter a destination name of up to 31 characters.
Select "Talkgroup" for Talkgroup calls.
Enter a 4 digit destination number.
Range: 0001 ~ 9999
L This number must also be registered in the [ID List] setting (Transceiver
Controller > Common Settings > ID List > ID List).
L When "FUNC Key" in the [Talkgroup Selection] setting (Transceiver Controller
> Common Settings > Profile > Profile > Talkgroup Selection) is selected, the
wireless LAN transceiver can call to members in the same Talkgroup.
Select "oFF" on the wireless LAN transceiver to return to the usual standby
mode screen.
Talkgroup
1001
Talkgroup1001
Talkgroup is selected
10/8 16 ： 57
Talkgroup1001
Talkgroup is selected
8-13
, and "Appointment" as the Callee ID for
(3)
Talkgroup
OFF
Talkgroup is oFF
10/8 16 ： 57
All
Talkgroup is oFF