Icom VE-PG4 Operating Manual page 153

6
TRANSCEIvER CoNTRoLLER
Profile screen
Transceiver Controller > Common Settings > Profile
■ Profile
TOT on Telephone Call ��
32
Use PBX Connection ��
33
<Apply> ��������
34
<Reset> ��������
35
28
29
30
31
32
33
Select whether or not the IP100H uses the Time-out timer on Telephone
Call.
L When "Disable" is set, transmitting does not stop, even if the period of time
that is set in the [TOT Timer] (29) has passed during a telephone call.
When a phone number from the IP100H is not registered in the
[Destination Settings], select "Transceiver Controller Telephone
Connection."
Click to apply the entries.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
34
6-82
35
(Default: Enable)
(Default: None)