6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Copy Transceiver Settings
The individual settings in the [Transceiver Settings] screen can be copied to another IP100H.
L IP address settings are not copied.
1
Check Box �������
1
<Apply> ��������
2
<Reset> ��������
3
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Setting List
Display the list of the registered IP100Hs.
L When verifying the contents, or editing the settings, select the individual number in the Unit ID.
Enter a check mark to [All] or the [Unit ID] that you want to copy the
settings to.
Click to apply the entries.
L The entries in the [Transceiver Settings] of the Source Transceiver are
copied to the transceiver settings that have a check mark in [Check Box]
(1).
Click to reset the settings.
L You cannot reset, after clicking <Apply>
6-53
2
3