Icom VE-PG4 Operating Manual page 285

11
PBX
Extension Group screen
PBX > Extension Group
■ Extension Group Entry
Ringing Sequence: Sequential
Port Type ��������
1
Extension Group Number
2
Extension Group Name �
3
Ringing Sequence ����
4
Extension Number ����
5
<Apply> ��������
6
<Reset> ��������
7
1
2
3
4
5
Select the Port Type that you want to copy the settings.
Enter a phone number to an Extension Group.
Range: number in 2 ~ 7 digits
Enter the Extension Group name of up to 31 characters.
Select the action when a call is incoming.
Simultaneous: In simultaneous ringing sequence, when the primary
Sequential:
Select the action when a call is incoming.
Click to apply entries.
Click to reset the settings.
L You cannot reset after clicking <Apply>.
11-17
6
receiver cannot respond for a certain period of time,
you can change to the secondary receiver. You can set
the receiver's extension from the primary to the tertiary
for a call.
In Sequential ringing, you can set the ringing extension
group.
7
(Default: SIP Phone)