Icom VE-PG4 Operating Manual page 347

13
PBX EXTEnSIon
Transceiver Controller Telephone Connection screen
PBX Extension > Transceiver Controller Telephone Connection
■ Control
L "PTT-on Tone" (18) and "PTT-oFF Tone" (19) are displayed only when any PTT Control Types from
"Group Call/All Call" (11) to "Individual Call to a Microphone" (17) are set to "DTMF."
Individual Call to an
16
EXT (EXT I/O Unit) ����
Individual Call to a
17
Microphone �������
11
12
13
14
15
16
17
18
19
20
Set the signal type for Individual Calls to EXT (I/o units.)
• VOX: When a voice signal is received from a SIP phone, the EXT (I/o
unit) enters the transmit mode.
• DTMF: When a tone signal is received from a SIP phone, the EXT (I/o unit)
enters the transmit mode.
• Constant Transmission during Call:
As soon as communication is established, the EXT (I/o unit) enters
the transmit mode.
The no Voice Release Timer detects only the signal (VoX or RTP)
received from the EXT (I/o unit.)
Set the signal type for Individual Calls to a speaker microphone.
• VOX:
When a voice signal is received from a SIP phone, the speaker
microphone enters the receive mode.
• DTMF:
When a tone signal is received from a SIP phone, the speaker
microphone enters the receive mode.
• Constant Transmission during Call:
As soon as communication is established, the microphone enters
the receive mode.
The no Voice Release Timer detects only the signal (VoX or RTP)
received from the speaker microphone.
13-54
(Default: VoX)
(Default: VoX)