Icom VE-PG4 Operating Manual page 113

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
L (This is an example of when the Emergency (33), Emer SW oFF (36), and Cancel by Time (40) are set to "Enable.")
Emergency �������
33
Assign Emergency to
34
Log Key (long press) ��
Emergency: Enable
Emer SW ON Timer ���
35
Emergency: Enable
Emer SW OFF ������
36
Emergency: Enable
33
34
35
36
37
38
39
40
Select whether or not to use the Emergency function. (Default: Disable)
Holding down the [Option Key] (20) or [Assign Emergency to Log
Key (long press)] (34) until "Emergency" is displayed turns oN the
Emergency function, and sends an Emergency call to the previously set
User ID.
The Emergency call is canceled when an RX code is received, or
holding down the [Option] key or [Log] key for a set period of time in the
[Emer SW OFF Timer] (36).
• The period of time that the key must be held down to turn the
Emergency function ON or OFF is set in the [Emer SW ON Timer] (35)
or in the [Emer SW OFF Timer] (36).
Select whether or not to use the [ ] key to send an Emergency call.
Enter the period of time for which the [Option] key or [Log] key must be
held down to turn the Emergency function ON.
Select whether or not to cancel the Emergency call by pushing the
[Option] key or [Log] key.
When "Enable" is selected, enter the period of time for which the
[Option] or [Log] key must be held down to turn OFF the Emergency
function, between 1 and 10 seconds.
6-42
(Default: Enable)
(Default: 5 seconds)
(Default: Disable)
(Default: 2 seconds)