Table of Contents
Advertisement
9
ExPERT SETTINGS
Call Recording screen
Expert Settings > Call Recording
■ Recorder Setting
Records communication audio of the linked transceivers.
Target: Disable
L The screens above show when the Call Type (4) is set to "Group."
Target: Enable
Index
���������
1
Mode ����������
2
Target ���������
3
Call Type ��������
4
1
2
3
4
3
Select an index. You can enter up to 4 recording boxes.
Select the recording/monitor mode.
• Disable:
• Recording:
• Monitor:
• Monitor + Recording: Simultaneously records and monitors.
Select whether or not to set wireless LAN transceivers as recording
targets.
When enabling this option, select a target wireless LAN transceiver in
Unit ID.
L When the target transceiver is deleted on the Transceiver Registration
screen, the recording settings are disabled.
(Transceiver Controller > Transceiver Settings > Transceiver Registration)
Select the type of call to record or monitor.
• Individual: Individual Calls from or to the specified Call ID.
• Group:
Group Calls to the specified Group.
• All:
The All Calls.
L When you select "Individual" or "Group," also set the Call ID from the list.
9-13
9
Does not record or monitors communication audio.
Records the communication audio to an external
storage device.
O utputs the specified communication audio to a
particular port.
10
(Default: 1)
(Default: Disable)
(Default: Disable)
(Default: All)
Advertisement
Chapters
Table of Contents
