Icom VE-PG4 Operating Manual page 95

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
Add All Call to ID List ��
8
Default Talkgroup ����
9
1
2
3
4
5
6
7
8
9
Select whether or not to display All Call in the ID list of the IP100H.
• Disable
Does not display "All" in the ID list.
L When "Disable" is selected in [Add All Call to ID List], you cannot select an
All call using the [
• Enable
L When [User ID List] (7) is set to "Enable," set [Add All Call to ID List] and
[Startup Talkgroup].
Select a Talkgroup if you want to set the IP100H to join a Talkgroup
when you turn ON the power.
• Disable
The IP100 starts up without joining any Talkgroup. The ID that is set in
the "First Call ID" in [User ID List]
turned ON.
• Enable
The IP100 joins the selected Talkgroup when it is turned ON.
L When [User ID List] (7) is set to "Disable," this item is not displayed.
] key.
(7)
6-24
(Default: Enable)
(Default: Disable)
is displayed when the IP100H is