Icom VE-PG4 Operating Manual page 166

7
CONNECTION PORT SETTINgS
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■ Digital Transceiver Connection
Configure the digital transceiver to connect to the RoIP Gateway. You can connect maximum of 4 digital transceivers
through the network.
L The above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to Digital
Transceiver 1 (D-TRX1).
L The above screen shows when the Digital Frame Packet (5) and Scrambler (11) are set to "Enable," and Specify
TX CC (10) is checked.
Connected Repeater's Address
1
TCP Port Number
2
(Connection Port)
UDP Port Number
3
(Data Port)
Connection Key Code
4
1
2
3
4
5
6
7
8
9
10
11
12
Enter the UC-FR5000's IP address.
Enter the Connection Receive Port number that is set in the
UC-FR5000. Do not duplicate the other port number.
• Range: 1 ~ 65535
Enter the Data Receive Port number that is set in the UC-FR5000.
Do not duplicate the other port number.
• Range: 1 ~ 65535
Enter the Key Code that is set in the UC-FR5000.
7-12
System: dPMR Mode 2
(Default: Digital Transceiver 1 (D-TRX1): 41200
Digital Transceiver 2 (D-TRX2): 41201
Digital Transceiver 3 (D-TRX3): 41202
Digital Transceiver 4 (D-TRX4): 41203)
(Default: Digital Transceiver 1 (D-TRX1): 41220
Digital Transceiver 2 (D-TRX2): 41221
Digital Transceiver 3 (D-TRX3): 41222
Digital Transceiver 4 (D-TRX4): 41223)
(Default: ucfr5000)