Icom VE-PG4 Operating Manual page 406

15
MANAGEMENT
Management Tools screen
Management > Management Tools
■ Unit ID Confirmation
You can know which VE-PG4 is the current RoIP Gateway by the blinking lights on it.
Check Status ������
1
Confirmation State ���
2
<Apply> ��������
3
<Reset> ��������
4
1
2
Display the status of the Unit ID.
• Checking:
• Stop:
Click <Start> to start checking.
• [PWR] blinks red.
• While checking, the <Start> button changes to the <Stop> button.
• This function automatically stops in 2 minutes, but you can also manually stop
the check by clicking <Stop>.
Click to apply the entries set on the Management Tool screen.
Click to reset the settings, when you change the settings on the
"Management Tools" screen.
L You cannot reset after clicking <Apply>.
15-8
3 4
Checking the Unit ID and [PWR] blinks red.
Does not check.