Icom VE-PG4 Operating Manual page 109

6
TRANSCEIvER CoNTRoLLER
Transceiver Settings screen
Transceiver Controller > Transceiver Settings > Transceiver Settings
■ Transceiver Settings
Clear Down during Telephone Call
21
Target Availability Check �
22
19
20
21
22
Select "Enable," if you want to terminate a phone call by pushing the
IP100H's [Option] key.
L When "Clear Down" is selected on the [Option Key] (20), this item is not
displayed.
Push
[Option] key
Select whether or not the IP100H displays a confirmation after it makes
an Individual Call.
When "Enable" is selected, the IP100H displays the "Connected,"
"Busy" or "No response" connection status.
L When the target station is out of range, "No response" is displayed.
L If the [Connection Notice Tone] is set to "Enable," the Success Tone or
Failure Tone sounds to notify its connection status.
( Transceiver Controller > Common Settings > Profile > Profile > Connection
Notice Tone)
Before the target telephone is picked
up, or during a phone call, pushing
the [Option] key terminates the phone
call.
L The IP100H can terminate the phone
call, when a telephone calls the IP100H
individually, or when the IP100H calls a
telephone.
1/24 16:57
Connected
6-38
(Default: Enable)
(Default: Enable)