Table of Contents
Advertisement
6
TRANSCEIvER CoNTRoLLER
Messages screen
Transceiver Controller > Common Settings > Messages
■ Save or Write the Message Setting
You can save a message file on your PC, or load a message file to the RoIP Gateway.
L If any IP100H settings have been changed, you must reboot it.
This is an example of when Group 1 is selected in [Message Group].
When a name is registered in a group, the name is also displayed.
Load Settings from File �
1
Save to File �������
2
1
2
Load a message file, which is saved on "Save to File" (2), to the RoIP
Gateway.
Click <Browse> to select the file to load.
Select the target file on screen, and click <Open>. The selected file is
displayed in "Load Settings from File". Click <Write> after selecting the
target file. Then, the selected file is loaded to [Messages].
L The previous data in [Messages] is overwritten the loaded data.
L If you select the file that is saved on the Settings Restore screen in the
[Management] menu, the setting is overwritten.
Save a message file, which is listed in the [Message], to your PC.
Click <Save>, and then <Save> on the box to save a message file (a
CSV file) to your PC.
L The file name varies, depending on the group number in [Message Group].
For example, the file name becomes "tn01_msg_list001.csv" when Group 1
of Tenant 1 is selected.
6-69
Advertisement
Chapters
Table of Contents
