Icom VE-PG4 Operating Manual page 307

13
PBX EXTEnSIon
Telephone (KX-UT Series) screen
PBX Extension > Telephone (KX-UT Series)
■ Telephone Individual Settings (KX-UT Series)
Sets the rules for the incoming calls, and so on, to each Extension group.
Dial Waiting Time ����
1
Accept Internal Calls while
2
on an External Call ���
Accept External Calls
3
without Button Assignment
Holding a Call with the
4
External Call Status Button
Long-Hold Watch Time ��
5
1
2
3
4
5
6
7
8
9
The waiting time to start dialing after you finished dialing.
• Range: 1 ~ 15 (seconds)
Set whether or not to accept an incoming extension call (including a
Peer to Peer call) while you are talking on an external call.
L When setting to "Refuse," the busy tone will be returned to an incoming
extension call.
Set whether or not to accept an inbound call to a <Dn key> button
when an <External Call Status> button is not assigned or all <External
Call Status> buttons are busy.
• Allow: Accepts an inbound call to a <Dn key> button.
• Refuse: Rejects an inbound call and returns the busy tone.
When selecting "Allow," you can hold an external call using an
<External Call Status> button.
Sounds an alert if you hold a call for time longer than the set period of
time.
• Range: 30 ~ 240 (seconds)
13-14
Group 1 ~ 30
(Default: 5)
(Default: Refuse)
(Default: Allow)
(Default: Refuse)
(Default: 180)